New Code! How will your Building be affected?Apr 19 2017 · 0 comments · Building Code, Nishkian Chamberlain ·0
By Rachel Wong, S.E., CAPM®
With the January 1st implementation of 2016 California Building Code (CBC), there is a new Building Code in town. Much of the 2016 CBC is similar to the previous 2013 CBC with respect to Structural Engineering with minor updates scattered throughout. However, one of the more significant updates was in regards to existing buildings. The 2015 International Existing Building Code® (IEBC) was adopted with the 2016 CBC as the latest and greatest guideline for existing building repair and modifications.
Originally drafted in 2003, the IEBC has been in the International Code Council (ICC) family of codes for over a decade, but faced limited adoption due to the presence of IBC/CBC Chapter 34 for existing buildings. Previously, IBC/CBC Chapter 34 was responsible for minimum requirements in existing building modifications, but had limited content for the variety of projects it covered. In 2014, the code committee decided that Chapter 34 should be eliminated in favor of the more fully-depicted IEBC. The IEBC maintains much of the prior CBC information, while expanding and clarifying specific topics. For example, a path for compliance of relocated buildings is provided in IEBC, and was previously considered to be a design “grey area”. Within IEBC Appendix A, a series of subsections are now provided for masonry, wood, concrete, and steel design, which previously were beyond the scope of Chapter 34.
But a lot of familiar requirements are present in IEBC, too. Previous CBC Sections 3402 to 3411 can now be found incorporated into the contents of IEBC Chapter 4, and Section 3412 has been relocated to IEBC Chapter 14. The CBC retrofit/strengthening threshold of 5% gravity/10% seismic modifications to existing elements without requiring strengthening to these elements is still applicable for Level 2 alterations that impact less than 50% of the building area.
The IEBC provides options for either prescriptive compliance of a structure or performance-based compliance, and permits the use of alternate methods as well. One of the seismic retrofit documents that go hand-in hand with these provisions is the relatively new ASCE 41-13 document, which will be featured in our upcoming May article.
Viscous Damper Brace Frames in an existing Steel Building
(Performance-Based Compliance Upgrade)
Each of the Nishkian offices has extensive experience with providing cost-effective solutions in retrofit, alteration and additions to existing structures. Should you need assistance with understanding how the new code will affect your existing building project, do not hesitate to contact one of our offices to receive expert assistance with any questions you may have. We are here to help!